24ch DMX DIMMER CONSOLE

Thanks for purchasing the 4ch DIMMING PACK, With reliable and easy to used. Suitable for any kind of device. etc.

Specification
4 controllable channels
5 A resistive load per channel
Maximum current 16 A
Number of channels:     4
Outputs via 4 safety sockets
LED diode of all channels
DMX-512 input and output
Analog 0-10v input and output
Music program
DMX-starting address adjustable via Dip-switches
For trussing and mounting directly at the device

Max. current/channel:  
Output sockets:     4 safety power outlets
DMX-output:     3-pin XLR-mounting-plug
DMX-input:     3-pin XLR-mounting-jack
Resistive load/channel:     1150 W

Accessories:
power cable
manual

Feature:
Power supply:     230 V AC, 50 Hz ~
Max. power output:     3680 W
Max. total current:     16 A
Dimensions:     318 x 165 x 96 mm
Weight:     3 kg

Thanks for purchasing the 4ch DMX DISTRIBUTOR, With reliable and easy to used. Suitable for any kind of device. etc.

Dmx distributor with one input and four output.
Absolute electric isolation between input and output, or between output and output.
Two types of DMX connector (3 pin & 5 pin) for each individual channel.
Every DMX output features an independent driver, data & data-indicator.
DMX switch is incorporated allowing isolation from the malformation caused by DMX input.
Input and output with a set of respective power supply and 500 mA internal fuse.

Accessories:
power cable
manual

 Feature:
Power supply:     230 V AC, 50 Hz ~
Power consumption:     20 W
DMX 512-output:     3-pin or 5-pin XLR-connector
Dimensions (LxWxH):     277 x 172 x 72 mm
Weight:     2.60 kg

44-key infrared controller adopts the advanced micro control unit, it is used for controlling a variety of
lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer
lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and
simplicity to use. Meanwhile, you could adjust brightness, static color choices, customize any color and
various dynamic changes in lighting effects through infrared remote control.

Connection
Place the strip on a clean, even, dry and not porous surface.
Do not fold the strip! Remove the coating paper of the tape on the backside of the strip and stick the strip in the desired location.
Note: If needed, the strip can be shortened every 3 LED’s / 5 cm, starting at the end of the strip.
1. Connect the RGB LED controller wire with the strip.
Attention: The 12V / 24V connection of the strip (see 12V+ indication on the strip) and the arrow on the plug of the RGB controller should be pointing towards each other!
Note: The controller can be fixed using tape or screws (not included!).
2. Connect the other side of the RGB controller with the adapter connection.
3. Connect the adapter with the power supply cable

Feature:

• Working temperature -20-60℃
• Supply voltage DC5V, 12V，24V optional (specify the required voltage on orders)
• 0utput 3 channels
• Connecting mode common anode/cathode optional (specify the required voltage on orders)
• External dimension L61*W35*H22 mm
• Packing size L136*W48*H59 mm
• Net weight 60g
• Gross weight 85g
• Static power consumption <1W
• Output current <2A(each channel)
• Output power 5V:<30W, 12V:<72W, 24: <144W

.

Product Feature:

1.     Transmitting/receiving standard DMX512 protocol data of console，and the master-slaver on line signal of the same kind of lighting each other.

2.     Single key to operate，tricolor LED indicator.

    The LED indicator bright：No DMX or wireless signal.

Red LED flash：Transmitting.

Green LED flash：Receiving

3.  126 frequencies band, FH design, and frequency-hopping synchronization automatically.

4.  7 groups ID code to set these different wireless nets without any interfere each other in the same place.

• Radio parameters communication distance: 600m (open space, different depending on the environment has changed)
• Frequency: 2,400 - 2,4835GHz, ISM, 126 RF channels
• Modulation: GFSK
• Maximum Transmit Power: 23dBm
• ReceiverSensitivity: -94dBm
• DMX Signal Interface RS485
• Environmental Limits Operating temperature: -40°C~85°C
• Storage Temperature: -65*C - 150*C
• Ambient Relative Humidity: 5%～95% (non-condensing)
• Power Requirements Power Input: 9 - 22VDC
• Power Consumption: 70mA@12VDC max.